FPV Field Monitor

Discussion in 'H920 Hexacopter' started by buzzy, Jul 4, 2016.

  1. buzzy

    buzzy New Member

    Joined:
    Dec 19, 2015
    Messages:
    15
    Likes Received:
    1
    Location:
    Florida
    Hey Guys, Is there a way of setting up additional field monitor using the H920 ST24 and CGO4, I have already tried HDMI from ST24 to a monitor, And the same HDMI to a EVF,
    I would appreciate any help!
     
    Tags:
  2. Cop

    CopterBoy New Member

    Joined:
    Dec 11, 2016
    Messages:
    5
    Likes Received:
    0
    Hey Buzzy,
    I use a fairly standard (720p) Monitor with an HDMI socket cabled to my gimbal operators controller (st24). When you connect it up you have to go into the "pad" section of the ST24 controller, then "settings", then "hdmi", select "enable out" and maybe toggle the resolution of the output between auto and 720, and bingo that gets me a permanent video feed on my external monitor....and a gimbal op that can't be more than 1.5m away from me....good for crew communication!
    I think the brand of my monitor is some random Chinese import "feelworld", but it's a good picture and cheap!
    Hope this helps, if you haven't got it working already.
     
Loading...

Share This Page

Loading...