Carica batterie LED BLU errore ricarica !!!AIUTO!!!

Discussion in 'Italian Forum' started by daniel drone typhoon, Aug 24, 2018.

  1. daniel drone typhoon

    Aug 24, 2018
    1
    0
    1
    Male
    #1 daniel drone typhoon, Aug 24, 2018
    Last edited by a moderator: Jul 15, 2019
    Ciao a tutti,

    ho un problema con la ricarica della batteria.

    Quando la posiziono sul carica batterie, si accende la spia BLU, lampeggia per 3 volte, si spegne per 1 secondo, emettete 1 suono acustico... e la cosa va avanti, si ripete, senza riuscire a ricaricare la batteria (il tutto è originale Yuneec).

    Il problema è sorto dopo un volo, al secondo messaggio di batteria scarica sono atterrato.
    Così ho concluso la missione.

    Arrivato a casa ho ricaricato le due batterie che ho in dotazione, la prima si è ricaricata senza problemi, la seconda invece, ogni volta che provo a metterla in carica, la base di ricarica si accende con la spia blu, lampeggia, emette un segnale acustico, e niente, la batteria non si ricarica.

    Vi chiedo aiuto, nelle istruzioni non c'è spiegazione su cosa fare e da cosa è dovuto l'errore.

    Grazie a tutti e spero in un aiuto dal FORUM


    Google Translate:
    Hi everyone, I have a problem with charging the battery. When I place it on the battery charger, the BLUE light comes on, it flashes 3 times, goes off for 1 second, emits 1 acoustic sound ... and the thing goes on, it repeats itself, without being able to recharge the battery (everything is original Yuneec). The problem arose after a flight, at the second low battery message I landed. So I finished the mission. When I got home, I recharged the two batteries I supplied, the first recharged without problems, the second one, every time I try to charge it, the charging base lights up with the blue light, flashes, emits a signal acoustic, and nothing, the battery does not charge. I ask you for help, in the instructions there is no explanation on what to do and what the error is due to. Thank you all and I hope for help from FORUM

    Daniel
     
  2. Egidio

    Egidio New Member

    Jul 15, 2019
    3
    0
    1
    #2 Egidio, Jul 15, 2019
    Last edited by a moderator: Jul 15, 2019
    Ciao a tutti, non so se qualcuno a risposto, ma anche a me quando inserisco la batteria in ricarica, fa una luce blu intermittente senza ricaricare la batteria..... cosa si può fare? La batteria è stata ricaricata 6 volte in tutto!!!

    Google Translate:
    Hi everyone, I don't know if someone answered, but also to me when I insert the battery in recharge, it makes an intermittent blue light without recharging the battery ..... what can you do? The battery has been recharged 6 times in all !!!
     
  3. WTFDproject

    WTFDproject Active Member
    Staff Member

    Oct 3, 2018
    561
    77
    28
    Male
    Retired Power Plant
    North Carolina Piedmont
    It is difficult to be certain without knowing which model drone you have, and which charger you are using.
    For the stock charger on many of the Typhoon models, and for other Yuneec models, the blue light (unable to charge) is most often caused by these things:
    1.) Charger has failed, and must be replaced.
    2.) Battery voltage is too low for the charger to recognize it. The battery can be too low due to excessive flight time, or improper storage between flights. It is sometimes possible to use a different type charger (without low voltage detection) to bring voltage up enough for the standard charger to work, but caution must be taken.
    3.) Bad connection or bad fit between battery and charger.
    4.) Actual battery failure.

    Google Translate:
    È difficile essere certi senza sapere quale drone modello hai e quale caricabatterie stai usando.Per il caricatore di serie su molti modelli Typhoon e per altri modelli Yuneec, la luce blu (non in grado di caricare) è spesso causata da queste cose:
    1.) Il caricatore non è riuscito e deve essere sostituito.
    2.) La tensione della batteria è troppo bassa perché il caricabatterie la riconosca. La batteria può essere troppo bassa a causa di un tempo di volo eccessivo o di uno spazio di archiviazione errato tra i voli. A volte è possibile utilizzare un caricatore di tipo diverso (senza rilevamento di bassa tensione) per portare la tensione sufficiente affinché il caricabatterie standard funzioni, ma occorre prestare attenzione.
    3.) Cattiva connessione o errato accoppiamento tra batteria e caricatore.
    4.) Guasto della batteria reale.
     
  4. Egidio

    Egidio New Member

    Jul 15, 2019
    3
    0
    1
    #4 Egidio, Jul 15, 2019
    Last edited by a moderator: Jul 15, 2019
    Scusate, il mio drone e il Breeze 4K e credo che il problema sia proprio la batteria scarica che non viene riconosciuta, unica causa possibile anche perché ho 2 carica batterie e il problema è lo stesso.... che carica batterie potrei acquistare?

    Google Translation:
    Excuse me, my drone and the Breeze 4K and I think the problem is the low battery that is not recognized, the only possible cause also because I have 2 battery chargers and the problem is the same .... which battery charger could I buy?
     
  5. WTFDproject

    WTFDproject Active Member
    Staff Member

    Oct 3, 2018
    561
    77
    28
    Male
    Retired Power Plant
    North Carolina Piedmont
    #5 WTFDproject, Jul 15, 2019
    Last edited: Jul 15, 2019
    Some additional thoughts:
    1.) The Breeze 4K batteries and the Breeze 4K charger have a problem frequently seen. The battery seems to be fully into the charger, but it is not. First try to push the battery fully into the charger.

    2.) If the batteries were left in either the drone or the charger (without power to the charger) for more than a few days, they are ruined, and will need to be replaced.

    3.) The next thing would be to measure the voltage across your batteries. If the voltage is below about 9V total, (3v per cell), it is not likely you can recover the battery.

    4.) It may be possible to recover the battery by using a 5V USB cable. Cut the ends of the cable, and use the USB to charge each cell individually for a few seconds at a time until all cells are above 3.5V. There is risk to this method, especially if you are not familiar with the battery terminals, battery polarity, cell polarity, USB polarity, and the dangers of LiPo batteries. Also note that even if you can recover the battery, you will likely have very reduced flight times due to the damage caused by excessively low battery voltage. Please understand this method is risky, and not likely to produce a useable result. If you do so, it must be at your own risk. Many would forego this method, and simply replace the batteries.

    Google Translation:
    Some additional thoughts:
    1.) The Breeze 4K batteries and the Breeze 4K charger have a problem frequently seen. The battery seems to be fully into the charger, but it is not. First try to push the battery fully into the charger.

    2.) If the batteries were left in either the drone or the charger (without power to the charger) for more than a few days, they are ruined, and will need to be replaced.

    3.) The next thing would be to measure the voltage across your batteries. If the voltage is below about 9V total, (3v per cell), it is not likely you can recover the battery.

    4.) It may be possible to recover the battery by using a 5V USB cable. Cut the ends of the cable, and use the USB to charge each cell individually for a few seconds at a time until all cells are above 3.5V. There is risk to this method, especially if you are not familiar with the battery terminals, battery polarity, cell polarity, USB polarity, and the dangers of LiPo batteries. Also note that even if you can recover the battery, you will likely have very reduced flight times due to the damage caused by excessively low battery voltage. Please understand this method is risky, and not likely to produce a useable result. If you do so, it must be at your own risk. Many would forego this method, and simply replace the batteries.
     
  6. Egidio

    Egidio New Member

    Jul 15, 2019
    3
    0
    1
    #6 Egidio, Jul 17, 2019
    Last edited by a moderator: Jul 17, 2019
    Ciao, problema risolto, grazie infinite!!!!
    Ho ricercato positivo e negativo sulla batteria ( linguette di estremità) e ho caricato con 11V per 5 minuti.... poi messo la batteria nel carica batterie originale e ha proseguito la ricarica senza problemi .
    Provata sul drone e il tempo di volo non è cambiato. Grazie ancora,
    Ciao
    Egidio


    Google Translate:

    Hello, problem solved, thank you so much !!I
    searched positive and negative on the battery (end tabs) and loaded with 11V for 5 minutes .... then put the battery in the original battery charger and continued charging without problems.Tried on the drone and the flight time has not changed.
    Thanks again,
    Hello
    Egidio
     
Loading...

Share This Page