CG03 Capacitor Value

Discussion in 'C-GO3' started by parker, Jul 9, 2018.

  1. parker

    parker New Member

    Jul 9, 2018
    2
    0
    1
    Male
    Can anyone tell me what the values are for the capacitor highlighted in yellow? Looking for voltage and farad values.

    Original one got ripped off and is gone. Thank you in advance.
     

    Attached Files:

  2. h-elsner

    h-elsner Active Member

    #2 h-elsner, Jul 10, 2018
    Last edited: Jul 10, 2018
    the two near connector are for cleaning power supply those are 22myF / 16V or 25V tantal (at least more than LiPo voltage 12,6V).
    The two on the right are for the +5V those are 100myF / 6,3 or 10V tantal.

    Search for "tantal SMD".

    Edit: Sorry, now I see see what you are mean with yellow marked. It is the small one near PWM. Forget this above. Unfortunately, this I don't know. But I do not think it is critical. I would try a 10 or 22 nF.
    Voltage is not the problem because it is not an elco.

    br HE
     
  3. parker

    parker New Member

    Jul 9, 2018
    2
    0
    1
    Male
    Thank you for replying. Are you sure you meant nanofarad and not picofarad?
     
  4. h-elsner

    h-elsner Active Member

    Yes, nano farad. We do not talking about HF, it only the PWM signal.

    But however, it's only my personal opinion. Never tested. But I myself would try...

    br HE
     
Loading...

Share This Page