C-GO3 CG03 stability issue

Discussion in 'Camera's (C-GO2/C-GO3/C-GO4)' started by Ice, Feb 18, 2018.

  1. Ice

    Ice New Member

    Joined:
    Feb 18, 2018
    Messages:
    6
    Likes Received:
    0
    Hi, all. I just got a q500. From the first flight, I noticed that the camera shakes continually during flight. At first I thought there was something I hadn't done right, then I noticed that when the drone is off, the camera is quite stable. Once the drone comes on, the camera moves, then rolls to the right and remains there, very free to the touch. During flight, it doesn't respond to the
     
  2. Wingshooter

    Wingshooter Moderator Staff Member

    Joined:
    Dec 16, 2015
    Messages:
    743
    Likes Received:
    232
    Location:
    East Tennessee, USA
    Is this new?
     
  3. Ice

    Ice New Member

    Joined:
    Feb 18, 2018
    Messages:
    6
    Likes Received:
    0
    The drone is new. I also noticed the camera sometimes slides forward off the seating and hangs by the wires. Had to put it back. Is this normal or is there something that should keep it in place? Couod this be the problem? Thanks!
     
  4. Wingshooter

    Wingshooter Moderator Staff Member

    Joined:
    Dec 16, 2015
    Messages:
    743
    Likes Received:
    232
    Location:
    East Tennessee, USA
    The camera should not slide forward. It locks into place.

    It sounds like the gimbal has a problem if it turns on and flops over. You might have to send it in to Yuneec.
     
  5. Ice

    Ice New Member

    Joined:
    Feb 18, 2018
    Messages:
    6
    Likes Received:
    0
    Gre
    Great!!
     
  6. Ice

    Ice New Member

    Joined:
    Feb 18, 2018
    Messages:
    6
    Likes Received:
    0
    [QUOTE="Ice, post: Is there nothing I can do? I am in Nigeria at the moment!
     
Loading...

Share This Page