C-GO3 FRANKESTEIN

Discussion in 'Camera's (C-GO2/C-GO3/C-GO4)' started by Randy Grunwald, Feb 12, 2018.

  1. Ran

    Randy Grunwald New Member

    Joined:
    Jan 29, 2018
    Messages:
    17
    Likes Received:
    1
    Okay, once and for all I need the definitive authoritative no BS answer on the issue of whether or not the CGO3 has to be sent to Yuneec to be "married"?
    If I replace the wifi board .....mine got disconnected from the main gimbal board and the ribbon connector from the gimbal control board got torn off the wifi board.....will I still need to send it in?
     
  2. Lawrence

    Lawrence Well-Known Member

    Joined:
    Jan 19, 2016
    Messages:
    948
    Likes Received:
    258
    I don't have a definite answer for you but I am wanting to upgrade the lens on my cgo3. I was speaking to Frank at Carolina Dronz and he said that I could replace the lens myself but I would have to be careful because it I disconnected that ribbon I would have to send it in for repairs and possibly it would not be repairable. Give them a call.
     
  3. Ran

    Randy Grunwald New Member

    Joined:
    Jan 29, 2018
    Messages:
    17
    Likes Received:
    1
    Thanks, Lawrence!
     

Share This Page