GB203 gimbal, tilt not working after ST10 firmware update

Discussion in 'GB203 GoPro Gimbal' started by Helge, May 15, 2016.

  1. Helge

    Helge New Member

    Joined:
    May 14, 2016
    Messages:
    1
    Likes Received:
    0
    Hello everyboby!

    I purchased a Blade Chroma with ST10+ and GB203 gimbal (BLH8660).
    After a firmware update of the ST10+ to "ST10+v01b24c"
    and the Chroma to "Firmware update 380qx_stm32_main_08_31_2015_20ms",
    I cannot control the gimbals tilt, up&down with the ST10s slider anymore.
    in the test function the slider is responding on the ST10s screen.
    The stabilyse funktion of the gimbal is working perfect.

    Does anyone got an idea for this?
    Perhabs someone have a older firmware version to restore the tilt function?

    Thanks in advance

    Helge
     
  2. Jagerbomb52

    Jagerbomb52 Moderator Staff Member

    Joined:
    Jun 3, 2015
    Messages:
    4,838
    Likes Received:
    1,781
    Location:
    Canada
    Not sure if you can downgrade so you might have to rename it to something higher than whats on the ST10+.
     

    Attached Files:

  3. RoboBoboCH

    RoboBoboCH Member

    Joined:
    Aug 1, 2015
    Messages:
    45
    Likes Received:
    12
    Location:
    Switzerland - Zuerich
    Have you done the binding between camera / gimbal and the ST10?
     
  4. Mic

    Michael Jay New Member

    Joined:
    May 18, 2016
    Messages:
    25
    Likes Received:
    1
    The gimbal is controlled via a pwm signal from the copter. If you have the gold connections, be sure a wire has not ripped out. The main thing to focus on is the copter and st10 firmware and connections. I am a q500 owner, so I don't know much about the chroma.
     
  5. Min

    Mina New Member

    Joined:
    Jun 19, 2016
    Messages:
    2
    Likes Received:
    1
    Hi,

    I was wondering if you found a solution and got it working yet?

    thanks,
    Mina.
     
  6. Blu

    BlueFlyer New Member

    Joined:
    Jun 20, 2016
    Messages:
    4
    Likes Received:
    0
    I'm having this issue also, however it was happening before I updated the ST10+

    I've emailed Yuneec European customer service with no reply yet. If I get nothing back I'll send the typhoon back to where I bought it from for a full refund.
     
  7. Min

    Mina New Member

    Joined:
    Jun 19, 2016
    Messages:
    2
    Likes Received:
    1
    hey guys,
    I have updated the ST10+ firmware to the latest version and since it stopped the tilt control

    I emailed Horizon Hobby Product Support and they got back to me with the solution and it works now.

    " Please connect the Chroma to the GUI and verify the selected gimbal is CGO2GB. The GB200 setting is not compatible.
    If not, make the change to update the Chroma"


    cheers,
    Mina.
     
    Virtum likes this.
  8. Vir

    Virtum New Member

    Joined:
    Jun 24, 2016
    Messages:
    1
    Likes Received:
    0
    After playing around with my tilt not working for 2 days the solution posted above by Mina worked. I went in the GUI selected CGO2GB then when I tried it out, the tilt just worked! Thank you so much for posting that information!! :)
     
Loading...

Share This Page

Loading...