I wanted to ask how to tilt the black teleconceiver higher than 0 degrees on the horizon and orient it progressively and in a controlled way on the target. I have an H520E and an E30Zx camera and I need to use it for surveillance shooting in the mountains. Instead I do not understand the use of the function that makes it frame up to the propellers and then with the cursor it is not possible to lock it where you want. Thanks but having had other drones where it was enough just to send the cursor up or down and you could tilt the gimbal to + 30 to - 90 on the horizon with H520E I can't. It will surely be easy, thanks Edward Inviato dal mio SM-T575 utilizzando Tapatalk
Set the Tilt Mode switch to the bottom (Velocity) position. Then use the Tilt Slider on the left side to position the camera. At center position the camera will stay at the angle it is in. At positions away from center the camera will move either up or down at a rate proportional to the distance away from center. When the camera is at the desired angle return the slider to center to hold that position. This mode allows adjustment from 90 degrees down to the maximum upward angle (somewhere between +15 and +30 degrees - I haven’t found the specification for that value).