Stop/Start Channel Settings H920 w/ ST24 radio

Discussion in 'ST24 Controller' started by Shanon Bell, Mar 20, 2016.

  1. Shanon Bell

    Shanon Bell New Member

    Joined:
    Mar 14, 2016
    Messages:
    5
    Likes Received:
    0
    I was in the channel settings looking at the various settings and i tapped on the start stop button and accidentally hit the deactivate. Now i can't get the h920 to start at all.. Does anyone know who to reactivate this button. I believe it's K1? Help please..
     
    Tags:
  2. Doc52p

    Doc52p Member

    Joined:
    Dec 20, 2015
    Messages:
    30
    Likes Received:
    2
    Shannon did you get this fixed ?
    I can help if you can tell me a few things about the screen.
     
  3. H2O Aviators

    H2O Aviators New Member

    Joined:
    Jul 6, 2016
    Messages:
    26
    Likes Received:
    2
    Location:
    Gilbert, Az
    Same boat here.
     
  4. Doc52p

    Doc52p Member

    Joined:
    Dec 20, 2015
    Messages:
    30
    Likes Received:
    2
    Hi Guys ....

    First off take off all props - add two Batteries and setup in comfy place.
    Turn on ST24 ... wait for boot.
    Dont worry about H920 fior now.

    Go into the channel settings.

    Look up the top Is Equal - Orange Writing - Selected (Highlighted Blue?) If Not select it.
    Mini version of Main Graph.

    1. Highlight Channel1 Output.
    2. Press and Hold B1 On the Input Side.
    3. Select Edit

    4. Green Dot Pos 0 set to Act (Little Blue Highlight around Act.) at -150%
    (You can do this by dragging the green dot on the Graph Screen to -150% or pressing - Pos 0 box at the bottom left and keep selecting until it gets to -150%)
    Little Green Dot on Main Graph should be in Bottom Left Corner of Graph.

    5. Blue Dot Pos 1 set to Act (Little Blue Highlight around Act.) Set to 0%
    Little Green Dot on Main Graph should be in Middle of Graph.

    6. Yellow dot Pos 2 set to Inh Grayed out Box.

    7. Select Save ... should say Successfully Saved ....

    Hit Back Button Bottom Right Main Menu of ST24 twice - back to main screen.

    Turn On H920 - NO PROPS - Wait for boot up .... Press start !
    You are all Done.

    Cheers.

    Doc
     
  5. Doc52p

    Doc52p Member

    Joined:
    Dec 20, 2015
    Messages:
    30
    Likes Received:
    2
    Let me know how you go.
     
  6. H2O Aviators

    H2O Aviators New Member

    Joined:
    Jul 6, 2016
    Messages:
    26
    Likes Received:
    2
    Location:
    Gilbert, Az
    Finally, someone who knows something! Thank you. I got the start button working but now the throttle button isn't working. I think I screwed that up too. Any help is greatly appreciated!!

    Here is a shot of my throttle setting screen:
    throttle.JPG
     
    Last edited: Jul 8, 2016
  7. Doc52p

    Doc52p Member

    Joined:
    Dec 20, 2015
    Messages:
    30
    Likes Received:
    2

    No worries.

    We can probably save you some time here.

    **** Disconnect any camera connected to the H920

    1. Start up your ST24
    2. Press the Home button - Looks Like a House.
    3. Select RC
    4. Select and hold H920 - let go
    5. Select Copy
    6. Press and Hold the Copied Version of this H920 - Let Go and Choose Edit
    7. Call it something you will know - I chose H920 2
    8. Top Right side you should wee Y-Hexe - If not select (Touch it on -off) Then select Y-Hexe Thats what the Tornado Type is.
    9. Back Button (Curvy Arrow Bottom Right Next to Home button.)
    10. Select Save.
    11. Back Button again
    You Should have the Flight Indicator Screen up now .. showing Roll Pitch etc.
    12. Select Channel settings.
    Hey Presto all the Channels needed for the Tornado 1 -12 are now selected for you and some should be labelled.
    Thr - Ail - Ele - Rud ...

    Now if you Go to the right side Press and release A01 you will see it Highlight S4
    Press and release S4 Select Properties.
    You will see it highlights S4 on a pic of you Radio.


    Now Try A02 Ch6 on the Right Side Channel Function Output.
    This Should Highlight S3 Light Orange and S4 Dark Orange ... they are tied together - same as ... yep you guessed it Ch1 ... Thr

    You press that and Highlight J1 B1

    You now have a working copy of all the settings required to pilot the Tornado - in their Original positions.
    Easiest way to check this is ... making sure you have your new copied Model selected ... Model select ... ensure H920 2 is Blue Highlighted ... Hit the Back Button now go to your System settings ... Hardware Monitor ... and check all of your switches and dials for operations.

    The next step is Bind this new Copied Model H920 2 To the Tornado.
    First you Bind the Tornado in the RC mode .

    Then Connect your camera and bind the camera and Transmitter.
    You can Thank Drone Ranger as well for this - we have had many a discussion.
    They are lacking in documents but it is a great aircraft.
    We need to apply may requests to Yuneec to get this rectified.

    Hope that Helped.

    Doc
     
  8. Doc52p

    Doc52p Member

    Joined:
    Dec 20, 2015
    Messages:
    30
    Likes Received:
    2
    PS make sure you bind the Tornado in an area you can get Satellites in !
     
  9. H2O Aviators

    H2O Aviators New Member

    Joined:
    Jul 6, 2016
    Messages:
    26
    Likes Received:
    2
    Location:
    Gilbert, Az
    Awesome!! That worked like a charm, thank you both!! I am glad you guys are here with knowledge. I do like the bird, just needs way better documentation! I think I am going to give it another round and see how it goes. The software is a bit buggy, but I hope it was a fluke.
     
  10. H2O Aviators

    H2O Aviators New Member

    Joined:
    Jul 6, 2016
    Messages:
    26
    Likes Received:
    2
    Location:
    Gilbert, Az
    BTW, I had a call into Tech support first AM and they we suppose to call me as soon as they got in......guess what....no call, but hey, I have an incident number......not sure what that does, besides nothing. Come on Yuneec USA, get your shit together!
     
  11. Doc52p

    Doc52p Member

    Joined:
    Dec 20, 2015
    Messages:
    30
    Likes Received:
    2
    ... Gday - Australia here ..... Glad to be of service .....

    ;)
     
Loading...

Share This Page

Loading...