Tornado H920, GB603 & Sony A7 serie

Discussion in 'H920 Hexacopter' started by Denis56, Dec 19, 2016.

  1. Denis56

    Denis56 Active Member

    Joined:
    Nov 30, 2015
    Messages:
    172
    Likes Received:
    29
    Location:
    Bangor - FRANCE
    Hello,

    Do you know how adapt GB603 gimbal for H920 with Sony Alpha 7 camera serie ?
    Which equipment to adapt and which connector on Wireless downlink LK58 box for the IR port and balancer on the gimbal ?
    I don't find a Yuneec reference for that....

    Thank you by advance for your help,

    Abstract of the Yuneec PDF user manual in english (page #18):
    http://download.yuneec.com/manuals/manual/Tornado_H920/h920_industry_user_manual_(st24)_v1.0.pdf
    FOR THE SONY α7 CAMERA
    STEP 1)
    Replace the GH4 camera lens mount frame with SONY α7 lens mount frame, and secure the 10 screws on the top and bottom of the frame to fix the frame.
    STEP 2) Install the infrared ray mount device to the left side of the SONY α7 lens mount frame, secure the screw on the bottom of the device, and connect the white connector to the IR port
    STEP 3) Mount the SONY α7CG balancer on the GB603 as illustrated.
    STEP 4) Install the SONY® α7 camera on the camera mount referring to the GH4 camera, there is no need to connect shutter cable for SONY® α7
    STEP 1 STEP 3 STEP 2 NOTICE:
    If using GB603 camera gimbal without SONY® α7 lens mount frame, only GH4 camera can be mounted. If using GB603 camera gimbal with SONY® α7 lens mount frame, both GH4 and SONY® α7 cameras can be mounted.
     
    Last edited: Dec 20, 2016
  2. Denis56

    Denis56 Active Member

    Joined:
    Nov 30, 2015
    Messages:
    172
    Likes Received:
    29
    Location:
    Bangor - FRANCE
Loading...

Share This Page

Loading...