Unable to select additional modes

Discussion in 'Blade Chroma Series' started by Arctic, Jan 7, 2017.

  1. Arctic

    Arctic New Member

    Joined:
    Dec 15, 2016
    Messages:
    8
    Likes Received:
    0
    tldr; whatever I do i can't get blue lights or access to addition modes outside of noob (safe) and way slow (angle)

    Whatever I do holding down ele and toggling 4x i'm unable under any condition am I able
    to access additional flight modes. I'm able to calibrate the compass using similar action.

    My guess is firmware mismatch.. any ideas?
     
    Tags:
  2. Lawrence

    Lawrence Active Member

    Joined:
    Jan 20, 2016
    Messages:
    649
    Likes Received:
    182
    I can't comment on firmware as I've never fooled with mine. Put speed in turtle and try it.
     
  3. Arctic

    Arctic New Member

    Joined:
    Dec 15, 2016
    Messages:
    8
    Likes Received:
    0
    I figured it out via : you're correct camera tilt up and speed in rabbit and it works as expected. Thanks for the reply. I'm sure this thread may help someone one day.
     
  4. Lawrence

    Lawrence Active Member

    Joined:
    Jan 20, 2016
    Messages:
    649
    Likes Received:
    182
    Sorry, I was wrong. You are correct, you must be in "rabbit" speed. Have fun, just be careful not to have the red lights on. Also remember that in stagility mode (blue lights) that altitude will not be held.
     
  5. Arctic

    Arctic New Member

    Joined:
    Dec 15, 2016
    Messages:
    8
    Likes Received:
    0
    Stripped off the camera and landing gear and she's a rocket. It's a bit sketchy; I feel all those years of RC planes is helping me out a bit here. Thanks again.
     
  6. Lawrence

    Lawrence Active Member

    Joined:
    Jan 20, 2016
    Messages:
    649
    Likes Received:
    182
    Good idea.
     
Loading...

Share This Page

Loading...