YUNEEC GB203 Gimbal

Discussion in 'GB203 GoPro Gimbal' started by Gemini061270, Sep 12, 2016.

  1. Gem

    Gemini061270 New Member

    Joined:
    Jul 24, 2016
    Messages:
    22
    Likes Received:
    0
    Just curious anyone else have this for their gopro? I just picked one up used everything seems to work perfect but it sure was a tight fit getting the gopro in and especially out was even harder and being this seems so delicate I really didn't want to break the gimble or wires. Just curious if anyone else has and any advice for putting it in and out just really tight fit.
     
    Tags:
  2. Jagerbomb52

    Jagerbomb52 Moderator Staff Member

    Joined:
    Jun 3, 2015
    Messages:
    4,569
    Likes Received:
    1,689
    Location:
    Kakabeka Falls Ontario Canada
    Ya they are a tight fit, after a few uses it will slide in and out better. Sliding in just grab the gimbal with your fingers and bush the camera in with your thumbs. Do the reverse when taking it out.
    The gimbal is pretty solid, its the 90 degree USB connector thats the weak link in the setup. I ended up taking the cover off and hot gluing the wires in place.

    20160731_135420.jpg 20160731_135502.jpg
     
Loading...

Share This Page

Loading...