Yuneec Q500 4 K Camera Tilt Repair

Discussion in 'General Discussion' started by chopperbob, Mar 7, 2019.

  1. chopperbob

    chopperbob New Member

    Mar 7, 2019
    5
    2
    3
    Re: Camera Tilt Problem Q500 4K
    Here's what corrected my camera tilt problem:

    With both units off (Controller and Drone) remove the camera from the drone.
    Power up controller then power up drone.
    Wait for both units to stabilize for flight.
    Next install camera while both units are on.
    Camera should be centered.
    Next power down and restart each unit.
    Camera tilt problem should be corrected, I know this is what I did to correct this problem.
     
    Bronson006 likes this.
Loading...

Share This Page